Denford machine paint colours

General support, help and advice for Denford CNC machines (old and new)

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Denford machine paint colours

Post by Denford Admin » Wed 09 Aug , 2006 10:00 am

As we have been asked about the paint colour codes on Denford machines a few times, I thought I'd publish the RAL numbers on here for everyone to see.
Unfortunately, its not that simple :(

The white is ordinary white in accordance with BS 4800 00E55 :D

The green is definately a special mix which came from a sample many many years ago - the supplier cannot even give us the mix "recipe" as they are using a mix of their own colours. They also say that it does not match any other standard colour available :cry:

The black is Fords' Graphite Grey - be careful not to order anyone elses "Graphite Grey" as it will be grey - not black

If you really need to touch up the green paint, then you are going to have to get the nearest match (RAL 6010) and hope for the best, or pick your own colour and paint the whole lot again !

Alternatively, you can contact the paint suppliers:
Manor Coating Systems Ltd
Otley Road, Shipley,
West Yorkshire,
BD17 7DP
Tel: 01274 587351

Post Reply