Microrouter Compact

All info relating to the Denford MicroRouter Compact small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Benny
CNC Expert
CNC Expert
Posts: 201
Joined: Fri 20 Oct , 2006 15:27 pm
Location: USA

Microrouter Compact

Post by Benny » Fri 01 May , 2009 12:43 pm

Customer writes in.....MicroRouter Compact troubles

At initial connect with the mill, the control panel comes up and the XYZ Home button appears. The Letters “XYZ” are outlined Red. This was his first concern.

Second, when he tried to Home the Z-axis, the spindle comes straight down and drives into the board which is inside the mill. Same thing happens when he presses the XYZ Home button.

He was afraid to do the homing for the X-axis and Y-axis concerned it may tear up his board even more.

Are you aware of any fixes for these problems?

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Fri 01 May , 2009 17:27 pm

Have they got the correct machine selected?

If it moves the wrong way they can stop it by pressing the escape key on the computer keyboard.

Post Reply