The guard door will not unlock on the Microrouter Compact. I completely took out the e-stop switch and blew out the debris from the contacts with an air compressor. The switch is closed so I was unable to get to the contacts inside. We removed the access panel under the guard lock and vacuumed out thouroughly. The LED on the back panel still has a green 2 showing.
Any suggestions?????
Microrouter Compact guard door not unlocking
Moderators: Martin, Steve, Mr Magoo
There is a way to unlock the guard - Use Only for Test Purposes. Remove the access panel under the guard lock, on the guard lock is a small black disk with a hex inset, for an Allen wrench, that is held in place with a small screw. Remove the screw and turn the disk with an Allen wrench 90 degrees, this will unlock the guard and keep it unlocked, bypassing the guard lock safety feature.