Denford Software & Machines

Posted: **Wed 18 Apr , 2007 10:51 am**

My Microrouter Spindle motor takes time to run up to speed

Posted: **Wed 18 Apr , 2007 11:30 am**

This sounds like an Analogue problem from the Baldor axis drive card

Terminals

SPINDLE and S-GROUND (Bottom LHS of board)

Posted: **Wed 18 Apr , 2007 14:35 pm**

If you have a spindle control card, it could also be this that is faulty.

Or maybe the motor brushes need replacing ?