What size is the t slot table that was originally supplied with the routers and how are they attached to the aluminium rails. Looking to get one shortly and I dont want to have to reinvent the wheel if necessart.
Many thanks
Mike
what size is the t slot table
Moderators: Martin, Steve, Mr Magoo
-
mike dempsey
- Posts: 17
- Joined: Thu 30 Jul , 2015 13:19 pm
- Hardware/Software: microrouter v3 with 2.31
- Location: Glenrothes
- Contact:
Re: what size is the t slot table
Here are a few bits that may help
- Attachments
-
- WORKTABLE.pdf
- (21.58 KiB) Downloaded 916 times
-
- WORKTABLE Model (1).pdf
- (38.57 KiB) Downloaded 975 times
-
madebymccoy
- Posts: 27
- Joined: Tue 13 Dec , 2016 23:36 pm
- Hardware/Software: Novamill
- in process of upgrading controller to Mesa I/O and LinuxCNC
- retrofitting head with power drawbar
- and next year, raise column by 70mm
Microrouter V3
Micromill 2000
Re: what size is the t slot table
Are these tables still available, or where/are they a 3rd party item?
Thanks
J
Thanks
J
-
HunterScotty
- Posts: 10
- Joined: Sat 02 Dec , 2006 21:12 pm
- Location: Scotland
- Contact:
Re: what size is the t slot table
Perhaps showing my ignorance:
The shape of the T-slots is curved towards the bottom and normal clamps' don't fit. Is this specific type of t-bed, with unique fittings and where can they be found?
The shape of the T-slots is curved towards the bottom and normal clamps' don't fit. Is this specific type of t-bed, with unique fittings and where can they be found?