Cannot Change feedrate on Denford Lathe

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
zlechlitner
Posts: 1
Joined: Fri 30 Nov , 2018 14:45 pm
Hardware/Software: Denford Microturn Lathe.

Software: VR Turning Turn 270 Pro

Cannot Change feedrate on Denford Lathe

Post by zlechlitner » Fri 30 Nov , 2018 14:52 pm

I cannot get my New Microturn lathe to Jog. I cannot get the feed to change off of 0%. Any help would be greatly appreciated. [attachment=0]jog problems.
Attachments
jog problems.PNG
jog problems.PNG (16.86 KiB) Viewed 6633 times

TDIPower
CNC Guru
CNC Guru
Posts: 613
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: Cannot Change feedrate on Denford Lathe

Post by TDIPower » Sun 02 Dec , 2018 19:27 pm

Which tab. Are you on in that picture, it looks like the home rather than job tab.

Post Reply