Page 1 of 1
Scantek 2000 scanturn and scanmill Information
Posted: Sun 16 Jun , 2013 1:40 am
by t28c34
Can someone tell me tom information about the machines i picked up at a auction? What software in need to download? Firmware? Will they run on Mach 3? All i have are the machines, a Scanturn manual and a quick start Scanmill manual.
Re: Scantek 2000 scanturn and scanmill Information
Posted: Mon 17 Jun , 2013 9:06 am
by Denford Admin
It will have run from VR Milling version 2.
You can get it running fairly easily from a basic BOB and Mach if you don't want programmable spindle control
Some links
Baldor Nextstep Step and Direction pins - 96way connector
viewtopic.php?f=4&t=2264
Baldor eurocard schematic and 96 way pinout:
viewtopic.php?f=15&t=2119
Starmill (Novamill) Baldor Mach3 conversion:
viewtopic.php?f=45&t=3184
Parker Digiplan stepper drive manuals
viewtopic.php?t=561
Mach3 running unmodified Triac!!!
viewtopic.php?f=47&t=1108
Help with Triac VMC converting to Mach
viewtopic.php?f=47&t=1763
Novamill, first time in cnc (Mach conversion)
viewtopic.php?f=41&t=2263
PKS Digiplan with Mach3
viewtopic.php?f=47&t=929&start=0
viewtopic.php?t=2263