Micro Turn Pro

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
mazda281
Posts: 1
Joined: Fri 04 Oct , 2024 20:49 pm
Hardware/Software: Micro Turn Pro
Micro Mill Pro

Micro Turn Pro

Post by mazda281 » Fri 04 Oct , 2024 20:56 pm

Just purchased the Micro Turn / Mill Pros, they both came with test parts already machined. Silly question how do you undo the chuck to remove part and add new stock? I can't see how to undo and their are no instructions.
Top
Mitch
Posts: 23
Joined: Tue 28 Oct , 2014 9:40 am

Re: Micro Turn Pro

Post by Mitch » Mon 07 Oct , 2024 12:22 pm

The machine is supplied with 2x Tommy bars. these fit into the holes in the chuck to loosen the jaws.
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1451
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Micro Turn Pro

Post by Steve » Mon 07 Oct , 2024 15:19 pm

On the software install menu there is an option to veiw or download the manual for the machine
mill.png
mill.png (219.77 KiB) Viewed 5022 times
Attachments
chuck.png
chuck.png (152.34 KiB) Viewed 5022 times
Top
Post Reply

Return to “Micromill / Microturn”