Microturn Machine Mis-match error

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Mazhar
Posts: 2
Joined: Sun 20 Dec , 2020 22:43 pm

Microturn Machine Mis-match error

Post by Mazhar » Fri 14 Oct , 2022 9:05 am

Hi everyone,
Just installed the latest version of VR cnc turning on windows 10 and I get the message Machine mis-match error and suggesting it is a Microturn 2000 instead of the Microturn 2000NS. everything seems to work fine its just annoying every time I start up I get the error. I did try to switch it to micro turn 2000 and it cannot communicate with the machine.
The badge on the machine suggests it is a Microturn 2000NS and the machine I have is usb.
Thanks
Attachments
Screenshot 2022-10-14 at 09.04.12.png
Screenshot 2022-10-14 at 09.04.12.png (1.14 MiB) Viewed 4554 times
20221009_161227.jpg
20221009_161227.jpg (599.63 KiB) Viewed 4554 times

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Microturn Machine Mis-match error

Post by Martin » Fri 14 Oct , 2022 10:31 am

You can change the Machine Type in Denford Easyupgrader.

You can install it from the VRTurning CD or download it from the Denford Website.

You will need to connect to the machine, Then Right click on the banner at the top. Then go in to Advanced (Password is Dave).

We used to set the Microturns to Unknown.

Mazhar
Posts: 2
Joined: Sun 20 Dec , 2020 22:43 pm

Re: Microturn Machine Mis-match error

Post by Mazhar » Fri 14 Oct , 2022 11:15 am

Hi Martin,
Thankyou for the quick reply. All sorted, Thankyou very much for your help much appreciated

Dodds
Posts: 16
Joined: Sun 12 Feb , 2017 20:54 pm
Hardware/Software: Novamill
Mach3

Re: Microturn Machine Mis-match error

Post by Dodds » Wed 26 Jul , 2023 18:52 pm

Martin wrote:
Fri 14 Oct , 2022 10:31 am
You can change the Machine Type in Denford Easyupgrader.

You can install it from the VRTurning CD or download it from the Denford Website.

You will need to connect to the machine, Then Right click on the banner at the top. Then go in to Advanced (Password is Dave).

We used to set the Microturns to Unknown.
I have the same issue. Says mis-match! Novaturn should be Novaturn NS

When I do as Martin says, I do not have a Novaturn NS to choose from in the list of machines! Question is, will it be safe to set to unknown/special for my NS

Thanks
David.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Microturn Machine Mis-match error

Post by Martin » Fri 28 Jul , 2023 7:34 am

Yes set it to Unknown/Special & it wont display the warning.

Dodds
Posts: 16
Joined: Sun 12 Feb , 2017 20:54 pm
Hardware/Software: Novamill
Mach3

Re: Microturn Machine Mis-match error

Post by Dodds » Wed 02 Aug , 2023 22:51 pm

Thank you very much Martin.

Post Reply