Looking for an EasyTurn Lathe to convert to Mach3

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
RNR107
CNC Apprentice
CNC Apprentice
Posts: 42
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Looking for an EasyTurn Lathe to convert to Mach3

Post by RNR107 » Wed 04 Apr , 2012 9:51 am

Hi all,
Anybody knows where I could buy an EasyTurn ?
I could swap / part exchange for a Boxford 125TCL fully converted to Mach3 if anybody interested...
I've been looking for a while now and nothing comes up... I guess it must be a good machine and once you got one, you don't want to sell it? :D

Ta,
RNR
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Looking for an EasyTurn Lathe to convert to Mach3

Post by Denford Admin » Wed 04 Apr , 2012 10:33 am

Searching for Easiturn (with an I not Y) might produce more hits?
If you have an ebay account, try setting up a saved search for Denford, Lathe, Easiturn, Easyturn etc... then they'll email you when one comes up.
Top
RNR107
CNC Apprentice
CNC Apprentice
Posts: 42
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Re: Looking for an EasyTurn Lathe to convert to Mach3

Post by RNR107 » Wed 04 Apr , 2012 13:25 pm

Hummm... I should get more hit indeed! :lolol:
Top
Post Reply

Return to “EasiMill / EasiTurn”