Easiturn ballscrew pulleys

dscolwill · Post by **dscolwill** » Sun 14 Sep , 2008 16:47 pm

Hi
I am in the process of converting my easiturn to mach 3 and need to work out the pully ratios for the lead screw and cross slide. Does anybody know what they are? or better still have figures for the steps per unit in mach.
Many thanks.
David

dscolwill · Post by **dscolwill** » Mon 15 Sep , 2008 10:09 am

Sorted by trial and error

SimonRafferty · Post by **SimonRafferty** » Thu 02 Oct , 2008 13:35 pm

dscolwill wrote:Sorted by trial and error

Come on - giz a clue?
It could save many conversions, not least mine, a bit of time!

Si

dscolwill · Post by **dscolwill** » Thu 02 Oct , 2008 16:21 pm

Hi
I have used 1000 steps per mm Based on 10 microstep drives for both X & Z.
The thing that confused me was that I had heard that the leadscrew is metric and the cross slide imperial. Anyway that works for me.
I also have scanned my wiring diagram of the auto changer and if Denford give their permission will post it on this site.

SimonRafferty · Post by **SimonRafferty** » Thu 02 Oct , 2008 22:36 pm

Thanks - that's brilliant (on both counts).

Actually, it makes sense - the max resolution of the original is 0.005mm and the drivers are half step - so 200 step per mm.

Si

Denford Software & Machines

Denford Software & Machines

Easiturn ballscrew pulleys

Easiturn ballscrew pulleys