Having recently become the lucky (??) owner of an Easiturn without the PNC 3 I'm about to try and remember sufficient electronics to get it running from PC.
Following a few threads on here I managed - eventually- to find a source for the multipin connectors used to connect through to the PNC.
My plan is to use the existing wiring as it seems to go to all the right places already and finding the connectors was a bit of a headache. For those who are doing the same sort of thing the current info is:
'Trident' connectors, made by ITT Cannon.
These are stocked in the UK by Farnell's
Hope to get the beast up and running soon as I have the control card and also motor cards, all I need is now to get the nerve to start wiring up the components into the box!
The opportunity to get this lathe was too good to miss - especially as the chucks from my Bantam will fit on it !
Easiturn connectors
All info relating to the Denford EasiMill and EasiTurn lathes and mills
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 24
- Joined: Wed 07 Oct , 2009 16:00 pm
Return to “EasiMill / EasiTurn”
Jump to
- Welcome
- ↳ Please read these first...
- ↳ Announcements
- CNC / Machines
- ↳ Machines
- ↳ Compact 1000
- ↳ Cyclone
- ↳ EasiMill / EasiTurn
- ↳ Meteor
- ↳ Micromill / Microturn
- ↳ MicroRouter
- ↳ MicroRouter Compact
- ↳ MicroRouter Vertical / MaxiRouter
- ↳ Mirac
- ↳ Novamill
- ↳ NovaTurn
- ↳ Orac
- ↳ PCB Engraver
- ↳ Quatro
- ↳ Router 2600
- ↳ Senior (Tom)
- ↳ StarMill
- ↳ StarTurn
- ↳ Triac
- ↳ Triton
- ↳ Turn270
- ↳ VersaLaser
- ↳ Viceroy
- ↳ VMC 1300
- ↳ ZeroCentre/ZeroTurn/ZeroBore
- ↳ Electronics
- ↳ Software
- ↳ Downloads
- CAD / CAM Software
- ↳ QuickCAM / LaserCAM 2D Design
- ↳ QuickCAM 3D/PRO/4D
- ↳ QuickTURN 2D Design
- ↳ TechSoft 2D Design
- ↳ Post Processors
- ↳ Solidworks
- ↳ VR Milling - All Versions
- ↳ VR Turning - All Versions
- ↳ Other CAD CAM and CNC
- 3D Printing / Rapid Prototyping
- ↳ UP! 3D Printer
- General
- ↳ Project Of The Week
- ↳ Denford Classifieds
- ↳ F1 / 4x4 / GT Racing In Schools
- ↳ Suggestions and Feedback
- ↳ User Stories / Projects / Courseware
- CIM
- ↳ Robots / CIM / VR CIM
- Random Picture Galleries
- ↳ Vintage Pictures