Anybody got a schematic for the Easimill 3, 3 phase version fitted with the 2 speed motor. Have fitted a new 3 phase invertor driven motor to mine and would like to tidy up the wiring.
Pete T
Schematic for Easimill 3
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Hi,Denford Admin wrote:This may help
many thanks for that schematic, unfortunately that is I think the one for the varispeed version. My Easimill 3 is the belt change 2 speed motor version - any hopes of a schematic for that one?
I probably confused things in that my new motor is in fact driven by an invertor which I have fitted.
regards
Pete T
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: