CNC Lathe Fanuc control 6T I press the power on then monitor (display) not show anythings.
The system not start cann't do anythings. Help me please.
+ 5 VDC + 24 VDC are OK. 3 phase 200 VAC OK.
CNC Fanuc 6T system not boot
Moderators: Martin, Steve, Mr Magoo
CNC Fanuc 6T system not boot
Hi all, I have problem with machine.
CNC Lathe Fanuc control 6T I press the power on then monitor (display) not show anythings.
The system not start cann't do anythings. Help me please.
+ 5 VDC + 24 VDC are OK. 3 phase 200 VAC OK.
CNC Lathe Fanuc control 6T I press the power on then monitor (display) not show anythings.
The system not start cann't do anythings. Help me please.
+ 5 VDC + 24 VDC are OK. 3 phase 200 VAC OK.
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: CNC Fanuc 6T system not boot
I'm sorry but none of us here have any information or knowledge of the Fanuc 6-T control.
However, the 1st thing I'd do is check for a fuse behind the monitor
However, the 1st thing I'd do is check for a fuse behind the monitor
Re: CNC Fanuc 6T system not boot
The monitor is worked. But it's not data for show. (I mean display have light but not have anythings show on it)
Now I try to check IC on CPU board. Buble board, CCR board and mem board.
I have not board for spare so I need to know and focus of problem.
If you have any comment please let me know and thanks for you service.
Now I try to check IC on CPU board. Buble board, CCR board and mem board.
I have not board for spare so I need to know and focus of problem.
If you have any comment please let me know and thanks for you service.