Cyclone P 21i and Triac 21i electrical diagrams needed

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Synchrocnc
Posts: 5
Joined: Sun 09 Jul , 2017 8:47 am
Hardware/Software: Triac Fanuc 21i
Cyclone P Fanuc 21i

Cyclone P 21i and Triac 21i electrical diagrams needed

Post by Synchrocnc » Sun 09 Jul , 2017 9:01 am

Hello,

New to the forum and just bought a Triac and Cyclone P, both with Fanuc 21i.

I do not have any electrical diagrams or parts lists for either machine and was wondering if anybody out there has any.

Many thanks in advance

Alan

ti nut
Posts: 8
Joined: Wed 06 Sep , 2017 9:18 am
Hardware/Software: Cyclone TU150-P
Fanuc OT-C

Re: Cyclone P 21i and Triac 21i electrical diagrams needed

Post by ti nut » Mon 02 Oct , 2017 0:11 am

Hi Alan,

Found electrical drawings for Cyclone Fanuc 21i (1999) whilst looking for Fanuc 0T-C drawings.

Only a few months late but hope it helps!
Attachments
cyclone-fanuc-21i-electrical-drawings.zip
(1.25 MiB) Downloaded 634 times

Synchrocnc
Posts: 5
Joined: Sun 09 Jul , 2017 8:47 am
Hardware/Software: Triac Fanuc 21i
Cyclone P Fanuc 21i

Re: Cyclone P 21i and Triac 21i electrical diagrams needed

Post by Synchrocnc » Sat 07 Oct , 2017 22:49 pm

Thanks very much, you are a star. :D

My patience has been rewarded.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Cyclone P 21i and Triac 21i electrical diagrams needed

Post by Martin » Tue 24 Sep , 2019 10:22 am

It may be best to monitor the inputs on the Fanuc 21I.
X7.0 = Position Bit 1
X7.1 = Position Bit 2
X7.2 = Position Bit 3
X7.3 = Position Bit 4
X7.4 = turret Clamp Signal
X7.5 = Strobe
X7.7 = Thermal Switch.
Attachments
Cyclone 21I TOE80.pdf
(21.96 KiB) Downloaded 383 times

SimonRafferty
CNC Expert
CNC Expert
Posts: 101
Joined: Tue 12 Aug , 2008 15:53 pm
Hardware/Software: Denford Cyclone P
EMCO PC Mill 100
Solidworks 2018
SimSolid
Location: Horsham, UK
Contact:

Re: Cyclone P 21i and Triac 21i electrical diagrams needed

Post by SimonRafferty » Wed 04 Nov , 2020 15:30 pm

Cyclone Fanuc-21i Electrical Drawings.pdf
(2.33 MiB) Downloaded 588 times
Here are the above DWG files converted to PDF & compiled in a single document.

Post Reply