Page 1 of 1
S'RAM BACK UP
Posted: Tue 14 May , 2013 8:48 am
by LYNXY990
I have a Cyclone with Fanuc OT which had been left in a collage for a number of years resulting in its batteries going flat. ( Big Trouble I know)
If anyone has a similar machine to this Im looking for a copy of the S'RAM BACK UP so I can get started on fixing it.
Serial cy27070 c
Date of manufacture 1990
Serial of electrics 9123227
Any help on this would be appreciated
Andy
07737472770
Re: S'RAM BACK UP
Posted: Tue 14 May , 2013 8:58 am
by Denford Admin
There is a parameter listing here:
https://denfordata.com/bb/viewtopic.php?f=33&t=2977
And some other posts which may be helpful:
Some posts regarding backing up a Fanuc before clearing the memory:
Fanuc 0tc 0mc RS232 reader puncher parameters:
viewtopic.php?f=15&t=2475
This one is long, but lots of tips related to Fanuc RS232 and parameters (especially the bit about not turning off when LSK is flashing!)
viewtopic.php?f=33&t=2316
Triac Fanuc OM-B Memory Upgrade:
viewtopic.php?f=47&t=2097
Fanuc memory chips and parameters:
viewtopic.php?f=33&t=3120
viewtopic.php?f=47&t=2444
Hold down EOB when outputting to backup the 900 parameters as well.
viewtopic.php?t=391
It WILL be worth writing the 450 diagnostics & 900 parameters down just in case!
Check your parameter settings related to RS232:
viewtopic.php?t=1179
Punched tape meters to bytes / Kb:
viewtopic.php?f=57&t=3867