HELP :
I am in need of the parameters for a Mitsubishi spindle inverter that is as fitted by the factory to my Denford Cyclone lathe (1992) if anyone could help me out with this info I would be extremely grateful
black8898
Mitsubishi Spindle Inverter
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Mitsubishi Spindle Inverter
Hi - sorry for the late reply...we did have a look around here for any information, but unfortunately didn't come up with anything.
It seems as though this invertor was not used on many machines...it's possible you have the only one in fact
It seems as though this invertor was not used on many machines...it's possible you have the only one in fact
Re: Mitsubishi Spindle Inverter
Thanks for the reply , what I have now done is to scrap the Mitsubishi drive unit as the company who have it for repair are struggling to find a new part required so I have decided to purchase a new drive unit , thanks for your help much appreciated
black8898
black8898