Cyclone TU150 U “Divide Overflow Error”

bradders · Post by **bradders** » Wed 07 Mar , 2007 8:08 am

I get a the following error “Divide Overflow Error” on my TU150 U Cyclone, any idea's ?

bradders · Post by **bradders** » Wed 07 Mar , 2007 8:09 am

Could be the PC running out of memory. Try making a win98 boot disk (or ideally an MS-DOS boot disk). Booting from a disk formatted on Windows XP could mean that the operating system takes up too much of the 640k base memory and so there is non left for the TU150 app. A bootable disk made on a Win98 machine takes up less space.

Post by **Denford Admin** » Wed 07 Mar , 2007 10:50 am

I'd also check for paramters or settings that are invalid.

I also found this on the net:

The error is frequently generated by programs
written in BP7 if they are executed on computers with clock speeds of approx >233MHz. There are numerous patches available on the web for fixing this. P.S. I very much doubt that this is a "memory conflict"!

We have had DOS programs in the past causing similar errors purely due to the fact that the PC was too fast - try running a CPU killer application if its because the PC has been changed to something faster

Denford Software & Machines

Denford Software & Machines

Cyclone TU150 U “Divide Overflow Error”

Cyclone TU150 U “Divide Overflow Error”