Cyclone P 21i and Triac 21i electrical diagrams needed

Synchrocnc · Post by **Synchrocnc** » Sun 09 Jul , 2017 9:01 am

Hello,

New to the forum and just bought a Triac and Cyclone P, both with Fanuc 21i.

I do not have any electrical diagrams or parts lists for either machine and was wondering if anybody out there has any.

Many thanks in advance

Alan

ti nut · Post by **ti nut** » Mon 02 Oct , 2017 0:11 am

Hi Alan,

Found electrical drawings for Cyclone Fanuc 21i (1999) whilst looking for Fanuc 0T-C drawings.

Only a few months late but hope it helps!

Synchrocnc · Post by **Synchrocnc** » Sat 07 Oct , 2017 22:49 pm

Thanks very much, you are a star.

My patience has been rewarded.

Martin · Post by **Martin** » Tue 24 Sep , 2019 10:22 am

It may be best to monitor the inputs on the Fanuc 21I.
X7.0 = Position Bit 1
X7.1 = Position Bit 2
X7.2 = Position Bit 3
X7.3 = Position Bit 4
X7.4 = turret Clamp Signal
X7.5 = Strobe
X7.7 = Thermal Switch.

SimonRafferty · Post by **SimonRafferty** » Wed 04 Nov , 2020 15:30 pm

Cyclone Fanuc-21i Electrical Drawings.pdf: (2.33 MiB) Downloaded 967 times

Here are the above DWG files converted to PDF & compiled in a single document.

Denford Software & Machines

Denford Software & Machines

Cyclone P 21i and Triac 21i electrical diagrams needed

Cyclone P 21i and Triac 21i electrical diagrams needed

Re: Cyclone P 21i and Triac 21i electrical diagrams needed

Re: Cyclone P 21i and Triac 21i electrical diagrams needed

Re: Cyclone P 21i and Triac 21i electrical diagrams needed

Re: Cyclone P 21i and Triac 21i electrical diagrams needed