Question about Renishaw tool setter on my Cyclone

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
youngguns3
Posts: 22
Joined: Tue 17 Aug , 2010 8:41 am
Hardware/Software: 1988 Cyclone with Fanuc OT-B

Question about Renishaw tool setter on my Cyclone

Post by youngguns3 » Fri 03 Sep , 2010 17:54 pm

Hi,

I believe I have the base for a Renishaw tool setter, and wanted to ask what setting arm is required to go with this.


Image
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Question about Renishaw tool setter on my Cyclone

Post by Denford Admin » Mon 06 Sep , 2010 8:33 am

This is the only document I've seen about Renishaw:
viewtopic.php?f=15&t=3023
Top
youngguns3
Posts: 22
Joined: Tue 17 Aug , 2010 8:41 am
Hardware/Software: 1988 Cyclone with Fanuc OT-B

Re: Question about Renishaw tool setter on my Cyclone

Post by youngguns3 » Wed 08 Sep , 2010 17:37 pm

Hi Admin,

Thank you again for your help. The link you gave me definitely pointed to what I was looking for.

Take care,

Bill Gillen
Top
Post Reply

Return to “Cyclone”