Floatinig head
Moderators: Martin, Steve, Mr Magoo
-
- CNC Expert
- Posts: 101
- Joined: Wed 20 Mar , 2013 22:34 pm
- Hardware/Software: Denford Triac PNC3
FeatureCam - CADCAM
Delcam Powershape
Floatinig head
Is the floating head on the c1000 a standard, or optional extra? and is it suitable only for only doing engraving on pcbs etc?
Re: Floatinig head
It is a optional extra. (Not available as a retrofit).