PCB Engraver control software v1.6 released 13th Nov 2012

Anything to do with our PCB / Engraving machine or software

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

PCB Engraver control software v1.6 released 13th Nov 2012

Post by Denford Admin » Tue 13 Nov , 2012 16:40 pm

// v1.6 26/07/2012 fixed issue where table area was not shown intitally
// v1.6 27/07/2012 altered default to not group tools in multiple programs.
// v1.6 13/11/2012 fixed toolchange message to show diameter set by program [Tooldefs
// v1.6 13/11/2012 forced an update to show the programs that will fit when the offset is changed
// v1.6 13/11/2012 creating an .fnc from the gerber import now include [Tooldef info which is read by the software

Check here for latest versions:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply