QuickTURN2D v1.35 released 2nd December 2022

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Steve, Mr Magoo, Martin, bradders

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3616
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickTURN2D v1.35 released 2nd December 2022

Post by Denford Admin » Fri 02 Dec , 2022 14:27 pm

QuickTURN2D v1.35 released 2nd December 2022

v1.35 - If QuickTurn was set to use imperial measurements, then the angle of tools in the tool editor was also being converted by 2.54. The angles now keep their original value regardless of measurement type.

Find the latest version here:
https://www.denfordata.com/downloads/Qu ... _v1.35.zip

Post Reply