QuickTURN2D v1.23 released 7th October 2015

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickTURN2D v1.23 released 7th October 2015

Post by Denford Admin » Wed 07 Oct , 2015 15:31 pm

//v1.23 - 7th October 2015 - The created GCode moves internal drill operations straight down to the x=0 position in line with the center of the billet, rather than to the edge of the billet first and then down.

The spindle is always brought to a halt in the GCode when a tool is changed.

There is an option under machine parameters to use coolant. When checked, the coolant on MCode (Mcode 8) is used at the start of the code, and is only stopped before a toolchange or at the end of the program.

Check here to download the latest version of all software:
http://www.denfordata.com/downloads/Qui ... _v1.23.zip

Post Reply