QuickTURN2D v1.17 released 18th Oct 2012

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickTURN2D v1.17 released 18th Oct 2012

Post by Denford Admin » Thu 18 Oct , 2012 9:40 am

//v1.17 - 10th Sep 2012 - fixes to do with Next button not enabling after calculating in wizard - turned out to be faulty progressbar component
//v1.17 - 16th Oct 2012 - Fix to material editor- if you edited aluminium then picked aluminium in wizard then edited material again,
// it would have aluminium highlighted but actually be showing the material settings for steel.
//v1.17 - 16th Oct 2012 - Added Turn270 Pro tooling settings which make use of CSS and feed/rev and larger cut depths

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply