QuickTURN2D v1.14 released 31st May 2012

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickTURN2D v1.14 released 31st May 2012

Post by Denford Admin » Thu 31 May , 2012 12:33 pm

v1.14 - Neutral turn tool is now changed to Neutral threading tool
v1.14 - Updates to Microturn recommended tooling files**

**nb, if you want the new tooling (*.mml) files to be installed then you must delete ALL instances 1st.
there will be .mml files in allusers\app data\denford\machines
AND in YourUserName\app data\denford\machines

Get latest software from here
http://website.denford.ltd.uk/index.php ... -downloads

Post Reply