Unable to write to quickturn2d.fps

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Unable to write to quickturn2d.fps

Post by Denford Admin » Wed 16 May , 2012 11:25 am

You may see this message on windows 7 or vista machines when closing down quickturn2d.
unable-to-write-to-quickturn2d-fps.jpg
unable-to-write-to-quickturn2d-fps.jpg (27.8 KiB) Viewed 8022 times
It is a bug which will be fixed in v1.13 or higher.
Normally only seen if quickturn2d.ini is deleted and only appears the 1st time the software runs after that.

Post Reply