Cannot find setup file in Windows 7

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
Jingalo
Posts: 3
Joined: Thu 10 Mar , 2011 17:14 pm
Hardware/Software: QuickTURN 2D Design

Cannot find setup file in Windows 7

Post by Jingalo » Thu 10 Mar , 2011 17:24 pm

Hi,

Installed Quickturn 2D Design 1.11 onto workstation running Windows 7 Ent 32 bit. Tried to launch application and receiving the error message 'Cannot find setup file: C:\Documents and Settings\All Users\Application Data\Denford\Machines\QuickTURN_Default.MML Closing now...'. I have administrative rights to the workstation and Windows 7 doesn't use 'documents and settings'.

Any ideas why this happens?

Thanks a lot.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Cannot find setup file in Windows 7

Post by Denford Admin » Fri 11 Mar , 2011 10:00 am

Are you sure its v1.11 ?
1.10 is the latest official release, v1.11 is still in beta so could well have problems.

Saying that, I have v1.11 beta installed on win7 64-bit with no issues at all.

Jingalo
Posts: 3
Joined: Thu 10 Mar , 2011 17:14 pm
Hardware/Software: QuickTURN 2D Design

Re: Cannot find setup file in Windows 7

Post by Jingalo » Fri 11 Mar , 2011 10:33 am

Hi,

The CD we received has ver 1.11 written in pen on the label. I'll download the previous version and install that instead. I'll let you know how it goes.

Thanks for the reply,
Stephen.

Jingalo
Posts: 3
Joined: Thu 10 Mar , 2011 17:14 pm
Hardware/Software: QuickTURN 2D Design

Re: Cannot find setup file in Windows 7

Post by Jingalo » Mon 06 Jun , 2011 15:02 pm

Hi,

Sorry it has taken so long. First of all, I tell a lie...Windows 7 does use documents and settings. I also downloaded and installed v1.10 and the same issue is happening. Anything else I could try?

Thanks for your help,
Stephen.
Attachments
Capture.PNG
Capture.PNG (26.42 KiB) Viewed 11440 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Cannot find setup file in Windows 7

Post by Denford Admin » Mon 06 Jun , 2011 16:06 pm

Can you locate this file please:
c:\Users\YOURUSERNAME\AppData\Roaming\Denford\QuickTURN2D.ini

Then right-click and edit it (in notepad)
You should find a section called [General Options]
Under here you will see the directory and filename that it is trying to locate.
You can change this filename to the actual location of the .MML file (looking in "c:\Documents and settings..." dosn't seem right on a windows7 machine)

On my win7 PC, this location is c:\Users\All Users\AppData\Roaming\Denford\Machines\QuickTURN_Default.MML

Post Reply