QuickTURN v1.2 released 9th June 2009

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickTURN v1.2 released 9th June 2009

Post by Denford Admin » Wed 10 Jun , 2009 10:34 am

Check for the latest version here:
http://www.website.denford.ltd.uk/suppo ... -downloads

NB: VR Turning v1.21 or higher is required for the QuickTURN threading cycles to work properly on a Denford machine.

Post Reply