Check for the latest version here:
https://www.website.denford.ltd.uk/suppo ... -downloads
NB: VR Turning v1.21 or higher is required for the QuickTURN threading cycles to work properly on a Denford machine.
QuickTURN v1.2 released 9th June 2009
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: