Tool tip angle stored incorrectly in Imperial mode.

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Steve, Mr Magoo, Martin, bradders

Post Reply
MAX THE MILLER
CNC Expert
CNC Expert
Posts: 131
Joined: Tue 23 Aug , 2011 18:25 pm
Hardware/Software: Denford Triac PC. VR Milling 5.51.0.616

Tool tip angle stored incorrectly in Imperial mode.

Post by MAX THE MILLER » Mon 07 Nov , 2022 11:24 am

Open QT2DD
Click options
Click Machine Options
Select Imperial
Click OK
Click options
Select Machine Tooling
Select a tool.
Change the tip angle say from 65deg to 55deg
Click OK in tool window
Click OK at bottom of the page
Click options
Select Machine Tooling
Select the tool whose tip angle has just been changed.
Value is shown is tool angle in degrees multiplied by 25.4 ie 1397 for 55deg and 1651 for 65deg.

User avatar
Denford Admin
Site Admin
Posts: 3612
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Tool tip angle stored incorrectly in Imperial mode.

Post by Denford Admin » Wed 09 Nov , 2022 11:54 am

Thankyou for that excellent writeup of how to repeat the issue. We're looking to fix this at the moment.

Post Reply