Page 1 of 1

RPC SERVER ALARM on VR Milling Ver 2

Posted: Fri 03 Mar , 2006 13:17 pm
by bradders
I get a RPC SERVER ALARM on VR Milling Ver 2 with RS232 connection

Posted: Fri 03 Mar , 2006 13:19 pm
by bradders
Q.RPC SERVER ALARM kept appearing (this means that the BALDOR 5000 software has crashed)

RPC = Remote Procedure Call


A.Down load Latest software version and use easy upgrader from www.denford.co.uk
or here https://www.denfordata.com/downloads/eas ... 1-9-cd.zip
8)

Posted: Wed 13 Feb , 2008 11:22 am
by bradders
"RPC Server Unavailable" error message is similar to a "Transmit Buffer Full" error message, in that, the communications has been lost betweeen the PC and the Machine. If it occurs when the program has been running OK for a while, it could be that if you have a Vacuum cleaner extracting the dust, that the static charge generated from the movement of air and dust in the vacuum cleaner pipe causes a STATIC DISCHARGE and interupts communications