VR Milling v2 tool not shown in VR machine

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

VR Milling v2 tool not shown in VR machine

Post by Denford Admin » Thu 25 Jan , 2007 16:37 pm

Q. When using a virtual CNC machine, a tool is not shown in the spindle.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 25 Jan , 2007 16:37 pm

Click the Tooling button and activate the correct cutter for the tool being used.
Top
Post Reply

Return to “VR Milling - All Versions”