Issues after moving to a new PC

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
LozHarropLures
Posts: 5
Joined: Mon 17 Sep , 2018 17:54 pm
Hardware/Software: Windoze 10

Issues after moving to a new PC

Post by LozHarropLures » Fri 16 Aug , 2019 15:43 pm

Hi,

I have hade to move VR Miling to a new PC and have managed to get my Starmill up and running. New PC is Windows 7 and control is via USB. Everything works fine except the FNC file display window does not scroll down as the program is executed and the Feed/Spindle box always displays the same feedrate and does not change with the program. I can adjust the feed and speed with the controls in the box.

Any ideas?

Thanks

LozHarropLures
Posts: 5
Joined: Mon 17 Sep , 2018 17:54 pm
Hardware/Software: Windoze 10

Re: Issues after moving to a new PC

Post by LozHarropLures » Sun 18 Aug , 2019 8:02 am

Sorted. The turbo button was active on the new machine. Silly me

Post Reply