EasyScan error Axis Specified Out Of Range

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

EasyScan error Axis Specified Out Of Range

Post by Denford Admin » Fri 12 Mar , 2010 11:04 am

You get "Axis Specified out of Range" when opening the Easyscan wizard:

This problem seems to happen occasionally - especially when the user has struggled to install the VR software and drivers.

All you need to do is right-click advanced options, enter the password and choose the scan axis (X or Y)
NB Do not change the scanning axis from default as it MUST match the way in which the machine is hard-wired. In other words, you can't just change which axis the scanner reads in (X or Y) as some wires need changing as well.
AxisSpecifiedOutOfRange.png
AxisSpecifiedOutOfRange.png (6.87 KiB) Viewed 2876 times
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Re: EasyScan error Axis Specified Out Of Range

Post by bradders » Fri 12 Mar , 2010 11:24 am

Note ? For some reason VR Milling 5 does not always register X as the default axis. This is when you get the "Axis Specified Out Of Range" error. By doing the procedure above and selecting X as the scanning axis solved the problem
Top
Post Reply

Return to “VR Milling - All Versions”