As usual, get the latest version from here:
https://www.website.denford.ltd.uk/suppo ... -downloads
v5.30 - Gerber reader changes to read multiple commands on each line (denoted by * in the .gbx file)
v5.30 - Made the machine disk save the .MAT file and read it back in. will work ok if you aren't creating a machine disk for a new machine name, and using the usual vrmilling5.MAT file in docs&settings\username\appdata\denford
v5.30 - Updated DenVRXM.ocx in C:\WINDOWS\system32 to use new denford logo
Updated VR machine .dll files to display new logo correctly
Changed micromill VR machine to increase working area - it was limited to table size which inhibited the max. billet size when in simulation without any apparent reason
v5.30 - Updated VMC manual in .pdf included
VR Milling v5.30 released 30th Sep 2009
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: