VR Milling v5.26 released November 6th 2008
Posted: Thu 06 Nov , 2008 16:42 pm
As usual, get the latest version from here:
https://www.website.denford.ltd.uk/suppo ... -downloads
// 22/5/2008 v5.24 - XZ arcs being drawn wrong in VMC simulation (also wrong in Novamill, Triton, Triac and Micromill) - fixed by changing arc angle sent to VR world
// 22/5/2008 v5.24 - support for ROHS Orange Led ESB boards
// 3/7/2008 v5.25 - Made changes to VMC1300 mints -manual pb input 7 to turn on drawbar release (output 5) when pressed and door open and spindle stopped
// - Also changed it to lock the guard when in auto toolchange cycle
// 7/7/2008 v5.25 - Changed ImportWizBillet so that you have the option to turn off autojoining of entities
// 7/7/2008 v5.25 - Fixed a circle expand bug in Postprocessor output in QuickCAM2D- if the XY arc start and end points had different Z values
// 29/7/2008 v5.25 - DXF import is creating silly big Z values on vertical router (PB reported) - fixed it and limited auto block thickness to 40mm
// 06/08/2008 v5.25 - VMC mints altered to have a scaling factor input 16 (55xx mints only) - drawbar release button also added to input 7
// 11/08/2008 v5.25 - Added COMMS_TCRemoved so that mint can force manual toolchange messages to appear
// 3/09/2008 v5.26 - Added parameter TC Height Adjust param - default is 0 and allows toolchange Z height to be adjusted up or down
// 08/10/2008 v5.26 - Fix in Draw2D3D to NOT change the arc angle for VMC / novamill etc.. when its a XY arc - only XZ
// 18/10/2008 v5.26 - Made the file overwrite create a new unique file when trying to run from USB stick and copying to the harddisk. (You are about to run a CNC program from a removable disk ...)
// 5/11/2008 v5.26 - Fixes to make last_x y and z correct when in an incremental drilling cycle in a subprogram (eg, G81)
// 5/11/2008 v5.26 - Fix made to removable drive warning, so that if you are in single step mode, it doesn't keep asking you to run from another location every time you press start
https://www.website.denford.ltd.uk/suppo ... -downloads
// 22/5/2008 v5.24 - XZ arcs being drawn wrong in VMC simulation (also wrong in Novamill, Triton, Triac and Micromill) - fixed by changing arc angle sent to VR world
// 22/5/2008 v5.24 - support for ROHS Orange Led ESB boards
// 3/7/2008 v5.25 - Made changes to VMC1300 mints -manual pb input 7 to turn on drawbar release (output 5) when pressed and door open and spindle stopped
// - Also changed it to lock the guard when in auto toolchange cycle
// 7/7/2008 v5.25 - Changed ImportWizBillet so that you have the option to turn off autojoining of entities
// 7/7/2008 v5.25 - Fixed a circle expand bug in Postprocessor output in QuickCAM2D- if the XY arc start and end points had different Z values
// 29/7/2008 v5.25 - DXF import is creating silly big Z values on vertical router (PB reported) - fixed it and limited auto block thickness to 40mm
// 06/08/2008 v5.25 - VMC mints altered to have a scaling factor input 16 (55xx mints only) - drawbar release button also added to input 7
// 11/08/2008 v5.25 - Added COMMS_TCRemoved so that mint can force manual toolchange messages to appear
// 3/09/2008 v5.26 - Added parameter TC Height Adjust param - default is 0 and allows toolchange Z height to be adjusted up or down
// 08/10/2008 v5.26 - Fix in Draw2D3D to NOT change the arc angle for VMC / novamill etc.. when its a XY arc - only XZ
// 18/10/2008 v5.26 - Made the file overwrite create a new unique file when trying to run from USB stick and copying to the harddisk. (You are about to run a CNC program from a removable disk ...)
// 5/11/2008 v5.26 - Fixes to make last_x y and z correct when in an incremental drilling cycle in a subprogram (eg, G81)
// 5/11/2008 v5.26 - Fix made to removable drive warning, so that if you are in single step mode, it doesn't keep asking you to run from another location every time you press start