Denford Software & Machines

Welcome to the Denford CAD CAM CNC forum
https://www.denfordata.com/bb/

Computer recognises machine as new hardware

https://www.denfordata.com/bb/viewtopic.php?f=2&t=1306

Page 1 of 1

Computer recognises machine as new hardware

Posted: Wed 28 Nov , 2007 17:44 pm
by Brentwood
It seems that my computer is no longer recognising the Microrouter compact as an existing piece of hardware. After loading VR milling 5.13, and clicking on the "connect to real machine" icon, it says "found new hardware, install software for baldor usb devise" It also says check connection of rs232 cable. We never used that cable, just the usb cable. Do I need to reinstall a usb driver for the microrouter? Any suggestions would be appreciated.
Thanks
Brian Joyce

Posted: Thu 29 Nov , 2007 7:02 am
by bradders
The Baldor drive board is not USB "Hot Plugable". So browse your VR Milling CD to the USB directory. Read the "Installing the driver.txt" and this should tell you how to reinstall the USB driver

Thanks

Posted: Thu 29 Nov , 2007 18:07 pm
by Brentwood
Got everything working again. Thanks for the help.
Brian
All times are UTC+01:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/