VR 5.13 question

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
Rodney Ragsdale
Posts: 1
Joined: Mon 01 Oct , 2007 17:54 pm
Location: Georgia

VR 5.13 question

Post by Rodney Ragsdale » Mon 01 Oct , 2007 18:07 pm

I'm a teacher, and am not as knowledgeable as I need to be on the simulation software.
In one of my classes, the simulation window displays a complete set of icons across the top (show 3d, 2d )the options toolbar, and the camera view; while in another class the options toolbar doesn't display.
i've looked everywhere trying to find where the students have turned it off, but no luck.
the options toolbar is critical to the students as it contains both the toolpath and datum options.
can you help
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Wed 03 Oct , 2007 21:42 pm

Hi,

With the 3D simulation window open, highlight the window.
Now the menu at the top will appear: Simulation
From the menu select: Simulation -> Options -> Show Options as Buttons
This is an On - Off type menu option
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Thu 04 Oct , 2007 8:59 am

I would also consider downloading the lattest version of VR Milling.

There have been a few updates since your current version.
Top
Post Reply

Return to “VR Milling - All Versions”