I have been watching the rocking chair video on denfords site. Does any one know what software was used to initially draw the parts as I want to produce some thing similar but ProDesk top etc make the router machine the surface all I want to do is cut out a shape
Thanks
rocking chair
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
I think it was originally done in prodesktop - that way you can see it "assembled" and make sure the slots all fit !
If you have QuickCAM pro, you can use the more advanced machining plans to create toolpaths around the shape edges only (eg waterline / pencil milling)
If you have VR Milling 5, you can create DXF files from proD or Solidworks, and open them directly in VR Milling- this will then let you create offset toolpaths via the DXF / CAM wizard
If you have QuickCAM pro, you can use the more advanced machining plans to create toolpaths around the shape edges only (eg waterline / pencil milling)
If you have VR Milling 5, you can create DXF files from proD or Solidworks, and open them directly in VR Milling- this will then let you create offset toolpaths via the DXF / CAM wizard