error message: invalid object allocation table
Moderators: Martin, Steve, Mr Magoo
error message: invalid object allocation table
Can anyone please tell me what this is and how to prevent or fix it? I rebooted the computer and it seemed to have resolved itself.
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Do you get this when connecting to the machine ?
I have seen some problems like this with earlier versions of VR milling - it seemed to be getting confused when connecting to the machine, and sending the wrong MINT (logic) file - the error is to do with the firmware version and the compiled Mint file being different
I'd recommend upgrading to v5.13 anyway:
https://www.denfordata.com/downloads/VRMilling_V5_13.zip
Then also install and run EasyUpgrader from here to get your machine onto the latest firmware:
https://www.website.denford.ltd.uk/suppo ... -downloads
I have seen some problems like this with earlier versions of VR milling - it seemed to be getting confused when connecting to the machine, and sending the wrong MINT (logic) file - the error is to do with the firmware version and the compiled Mint file being different
I'd recommend upgrading to v5.13 anyway:
https://www.denfordata.com/downloads/VRMilling_V5_13.zip
Then also install and run EasyUpgrader from here to get your machine onto the latest firmware:
https://www.website.denford.ltd.uk/suppo ... -downloads
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: error message: invalid object allocation table
Updates links 4.3.2020
Do you get this when connecting to the machine ?
I have seen some problems like this with earlier versions of VR milling - it seemed to be getting confused when connecting to the machine, and sending the wrong MINT (logic) file - the error is to do with the firmware version and the compiled Mint file being different
I'd recommend upgrading to v5.68 anyway:
https://website.denford.ltd.uk/software- ... s-support/
Then also install and run Denford Machine Firmware EasyUpgrader from here to get your machine onto the latest firmware:
https://website.denford.ltd.uk/software- ... s-support/
Do you get this when connecting to the machine ?
I have seen some problems like this with earlier versions of VR milling - it seemed to be getting confused when connecting to the machine, and sending the wrong MINT (logic) file - the error is to do with the firmware version and the compiled Mint file being different
I'd recommend upgrading to v5.68 anyway:
https://website.denford.ltd.uk/software- ... s-support/
Then also install and run Denford Machine Firmware EasyUpgrader from here to get your machine onto the latest firmware:
https://website.denford.ltd.uk/software- ... s-support/