Hello,
My customer has four (4) seats for VR. Can he install 3 on a server and one as 'standalone' ?
Does VR even work with a server?
Regards,
James
VR Milling on a Server?
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: VR Milling on a Server?
There have never been any network aware dongles, flash-codes or security files (seckey.tff)
I'm not sure why they are asking about servers ? Do they intend to distribute/run the application from server to workstation(s) ?
Do they currently have hardware dongles ?
If they have flash code or seckey.tff licenses then all they need to do is:
Include the flash info in windmill.ini (v2)
or
copy the seckey.tff file into the vrmilling5 program files directory (v5)
I'm not sure why they are asking about servers ? Do they intend to distribute/run the application from server to workstation(s) ?
Do they currently have hardware dongles ?
If they have flash code or seckey.tff licenses then all they need to do is:
Include the flash info in windmill.ini (v2)
or
copy the seckey.tff file into the vrmilling5 program files directory (v5)