Laser Scanner, CBERCODE.TXT error
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Laser Scanner, CBERCODE.TXT error
Laser Scanner, CBERCODE.TXT error
- Attachments
-
- Laser Scanner error.GIF (89.46 KiB) Viewed 5216 times
Last edited by bradders on Thu 22 Jan , 2009 12:16 pm, edited 2 times in total.
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Laser Scanner, CBERCODE.TXT error
We've just had this problem here.
Even if you believe the easyscan driver has been installed from the VR MIlling 5 CD menu, double check that the folder C:\MCC exists.
If not, then try installing the easyscan drivers again, if that still doesn't work then copy the MCC folder from the V5 CD into the root of c:\
Even if you believe the easyscan driver has been installed from the VR MIlling 5 CD menu, double check that the folder C:\MCC exists.
If not, then try installing the easyscan drivers again, if that still doesn't work then copy the MCC folder from the V5 CD into the root of c:\
- Attachments
-
- easyscan-drivers.jpg (56.83 KiB) Viewed 4895 times