Have to login / register to see attachments / PMs

Welcome to the Denford CAD CAM CNC forum !
Please read these posts before doing anything else.
Thank you.
User avatar
Denford Admin
Site Admin
Posts: 3619
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse

Have to login / register to see attachments / PMs

Post by Denford Admin » Mon 04 Dec , 2006 14:07 pm

We've noticed that some attachments don't appear when you are not logged in - (images do for some reason)
Sometimes images dont appear either (or even give you a clue that there is an attachment :? ) - so to be sure you are getting the most from the forum - please register and login every time !

So, if you want to access the steadily growing wealth of info, please register

Also noticed that some members don't know about PM (Private Messages) - its a bit like your own little email area that has a message inbox and outbox allowing private communication to be sent to other forum users.
You get to it by clicking the link at the top which will read something like:
You have no new messages
Log in to check your private messages
You have 1 new message(s)