Page 1 of 1
EdgeCAM Denford Post Processor File
Posted: Tue 03 Apr , 2007 11:15 am
by Denford Admin
If you are struggling to configure EdgeCAM for use with a Denford machine, try this Denford EdgeCAM post processer file:
files/denford_125.mcp
Re: EdgeCAM Denford Post Processor File
Posted: Mon 02 Jan , 2012 13:29 pm
by blakey235
Hi
This web address returns an error in windows 7 regarding file association, is there a format you can send it in that will open in EDGECAM please
Regards Blakey
Re: EdgeCAM Denford Post Processor File
Posted: Tue 03 Jan , 2012 13:18 pm
by Denford Admin
I've attached it as a .zip file:
Re: EdgeCAM Denford Post Processor File
Posted: Thu 05 Jan , 2012 15:46 pm
by blakey235
Have opened zip file OK, but appears to be in machine code, does it have to be opened in EdgeCAM?
Re: EdgeCAM Denford Post Processor File
Posted: Thu 05 Jan , 2012 16:58 pm
by Denford Admin
Yes I'm pretty sure you'll have to open the file with EdgeCAM or place it into the correct directory (something like: C:\Program Files\EdgeCAM\Machdef - wherever the other post .mcp files are)
Re: EdgeCAM Denford Post Processor File
Posted: Thu 30 Mar , 2017 22:17 pm
by Jeremy
This worked great for me, thanks so much