EdgeCAM Denford Post Processor File

Anything to do with configuring CAM systems and Post Processors to run on different CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

EdgeCAM Denford Post Processor File

Post by Denford Admin » Tue 03 Apr , 2007 11:15 am

If you are struggling to configure EdgeCAM for use with a Denford machine, try this Denford EdgeCAM post processer file:

files/denford_125.mcp
Top
blakey235
Posts: 16
Joined: Fri 08 Oct , 2010 10:01 am
Hardware/Software: I have Harrison M250 with Anilam control +Bridgeport interact 1 with Heidenhain 407
just bought Denford Quatro with North East Electronics Control, and I use Edgecam for Programming
Location: Treforest South Wales
Contact:
Contact blakey235

Re: EdgeCAM Denford Post Processor File

Post by blakey235 » Mon 02 Jan , 2012 13:29 pm

Hi
This web address returns an error in windows 7 regarding file association, is there a format you can send it in that will open in EDGECAM please

Regards Blakey
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: EdgeCAM Denford Post Processor File

Post by Denford Admin » Tue 03 Jan , 2012 13:18 pm

I've attached it as a .zip file:
Attachments
denford_125.zip
(20.59 KiB) Downloaded 1480 times
Top
blakey235
Posts: 16
Joined: Fri 08 Oct , 2010 10:01 am
Hardware/Software: I have Harrison M250 with Anilam control +Bridgeport interact 1 with Heidenhain 407
just bought Denford Quatro with North East Electronics Control, and I use Edgecam for Programming
Location: Treforest South Wales
Contact:
Contact blakey235

Re: EdgeCAM Denford Post Processor File

Post by blakey235 » Thu 05 Jan , 2012 15:46 pm

Have opened zip file OK, but appears to be in machine code, does it have to be opened in EdgeCAM? :dumbfounded:
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: EdgeCAM Denford Post Processor File

Post by Denford Admin » Thu 05 Jan , 2012 16:58 pm

Yes I'm pretty sure you'll have to open the file with EdgeCAM or place it into the correct directory (something like: C:\Program Files\EdgeCAM\Machdef - wherever the other post .mcp files are)
Top
Jeremy
Posts: 3
Joined: Thu 30 Mar , 2017 22:13 pm
Hardware/Software: Denford triac, edgecam

Re: EdgeCAM Denford Post Processor File

Post by Jeremy » Thu 30 Mar , 2017 22:17 pm

This worked great for me, thanks so much
Top
Post Reply

Return to “Post Processors”