Does anyone know if the Denford software (QuickCAM 2D, QuickCAM 3D or QuickCAM Pro, QuickTURN 2D) is compatible with mach 3 ?
ie, is there a Mach3 post processor for Denford software ?
Mach 3 Post Processor
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Mach 3 Post Processor
We haven't really been asked much for one, but I have created a basic one here...
As you can see, the simulation in the demo version of Mach3 appears to work, but it's never been tested on a machine.
(the example in the screenshot was created in QuickCAM 2D Design and a follow toolpath created)
Drop the file here: C:\Documents and Settings\All Users\Application Data\Denford\Posts for Xp/2000
or here in vista and windows 7:
c:\ProgramData\Denford\Posts
As you can see, the simulation in the demo version of Mach3 appears to work, but it's never been tested on a machine.
(the example in the screenshot was created in QuickCAM 2D Design and a follow toolpath created)
Drop the file here: C:\Documents and Settings\All Users\Application Data\Denford\Posts for Xp/2000
or here in vista and windows 7:
c:\ProgramData\Denford\Posts
- Attachments
-
- mach3-screenshot.jpg (119.11 KiB) Viewed 17117 times
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Mach 3 Post Processor
Just made a slight change to allow more comments (using the % sign to tell Mach to ignore the rest of the gcode line)
- Attachments
-
- Mach3.ppl
- (1.74 KiB) Downloaded 1410 times