Page 1 of 1
Electrical diagrams Cyclone TU150E and Triac Machines
Posted: Fri 13 Jun , 2008 6:55 am
by SaulGuv
Hello
We have in the University UTP in Mexico ,one Cyclone TU150E Serial:E0 4480/3, Serial No. of electronics: OC 0017454 and one Triac VMC serial:E0 4480/1 with serial No. of electronics: OC 0017451, we want to made the integratión using one Fanuc Robot, but we do not have de electrical diagrams, I would like to get them but Do you have available that information?. and the manuals of this machines.?
I hope anybody can help us
BYE
Posted: Fri 13 Jun , 2008 8:36 am
by bradders
Cyclone TU150E 1993 drawings
Posted: Fri 13 Jun , 2008 8:52 am
by bradders
Triac VMC 1993 drawings
Posted: Fri 13 Jun , 2008 8:55 am
by bradders
Note ! These 2 machines can be upgraded (if they are initially in full working order) to run VR Milling Ver 5 and VR Turning Ver 1 software. Our agent in Mexico is Harry Mazal
Harry Mazal, S.A. de C.V.
Laguna de Tamiahua No.204
Col. Anahuac, Del. Miguel Hidalgo
11320 Mexico, D.F.
Mexico
Tel 00 52 55 53961133
Posted: Fri 13 Jun , 2008 14:07 pm
by SaulGuv
Thank you by your soon answer
The Cyclone and the Triac VMC have Despatch date: October 1994 Those drawings are compatibles?
I saw in the files the seccion of additional I/O , it mention 2 Aux Input,1,2 and 2 Aux Output 1,2, there is a Produc Manual o where explain the function of signal of the additional I/O and each component?
Bye
Posted: Mon 16 Jun , 2008 7:44 am
by bradders
Unfortunately, I cannot be 100% sure that the drawings a 100% compatible for your machines. Details of drawing Nos were not kept for individual machines.
The additional I/O was just extra I/O for the controller
Posted: Mon 16 Jun , 2008 9:33 am
by Denford Admin
Aren't Aux I/O used for controlling the machine in CIM/Robot mode ?
To give you some clues, I think:
Aux I/O 1 is to control the CNC (start/stop program)
Aux I/O 2 is to control the Vice or Chuck
These may be controlled by M-codes:
62,63,64,65,66,67,76 and 77
Posted: Mon 16 Jun , 2008 9:39 am
by bradders
I think Aux 1 was a Machine BUSY / IDLE signal and Aux 2 was clamp OPEN / CLOSE signal
Re: Electrical diagrams Cyclone TU150E and Triac Machines
Posted: Fri 09 Jul , 2010 1:02 am
by JRennich
Hello,
Do you know if the schematics for the Triac VMC 1990 model is the same as your downloadable 1993 version? If not, do you know where I might obtain the correct verison? To the best of my knowledge, my machine was a DOS run unit.
Thanks,
JRennich
Re: Electrical diagrams Cyclone TU150E and Triac Machines
Posted: Fri 09 Jul , 2010 9:03 am
by Denford Admin
Why not download them and see if it matches, or is close ?
Unfortunately, the people around in 1990 who knew exactly what was what, no longer work for Denford
- we do our best to provide (free) information from what remains here in the old filing cabinets, but we simply don't know what different variations of hardware and software were being used 20 years ago.