School Networks and user rights are always causing problems for our software, so here is a little utility to retrieve the files and paths used by Denford applications.
It will tell you if you are able to write to these paths and files:
http://www.denfordata.com/downloads/NetworkDrives.zip (791Kb)
Last update 25th Feb 2011
Its a single .exe file zipped up - extract it and run it from any location
Please leave any feedback here
Network Drive Test Utility
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Network Drive Test Utility
- Attachments
-
- network-drive-utility.gif (26.46 KiB) Viewed 3360 times