Parts Lists for Denford manual lathes

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Parts Lists for Denford manual lathes

Post by Andy B » Fri 13 Jul , 2007 20:16 pm

Well, its taken a few hours key-bashing, but here is the first installment of parts lists in electronic form for the manual lathes.

I've started with the 280VS models, both manual and electric versions - the parts lists for these were both in the same folder in a dusty corner of the old Denford drawing office.

There is another folder which I know has a lot of the 5" TDS1 parts lists, together with various other machines. I'll hopefully get a copy of those later in the year - to give me something else to do in the cold autumn evenings!

A lot of parts from the 5" models were carried through the range, and you can spot these as they carry the 'ML' number prefix.

Hope this is of use to other owners.

Andy
Attachments
Denford Manual Lathe Drawings.xls
(151.5 KiB) Downloaded 1174 times

Post Reply